News

Structure And Composition Of Plastic Granulator

The plastic granulator consists of a base, left and right wall panels, an electric motor, a transmission device, a pressing roller, a rolling cutter (cutting blade), a swinging cutter (granulating ...

Precautions For Plastic Mixers

1. Ensure that the voltage and frequency of the power supply match the markings attached to the nameplate by the manufacturer. 2. Connecting cables and ground wires should comply with local regulat...

Operating Instructions For Plastic Mixer

1. Before use, an air freight test should be conducted 2. Air freight conversion test machine. Large plastic vertical mixers can only be put into production if no abnormal noise, high temperature o...

Performance Characteristics Of Plastic Mixers

1. Mixing and drying are synchronized. Due to the continuous flow of materials during the drying process, the heat penetration is uniform, the drying time is short, and it is not easy to solidify q...

Advantages Of Plastic Blenders

1. Automatic operation timing, overload protection, feeding limit alarm and other functions; 2. And it has the advantages of small land occupation, large capacity, low power consumption, labor savi...

Product Introduction Of Plastic Blender

Characteristic: The material put into the hopper is conveyed to the upper end of the barrel through a spiral spindle, and then falls in an umbrella shape and continuously circulates and mixes to ac...

Working Principle Of Plastic Mixer

A device that utilizes the principle of rapid rotation to achieve uniform mixing. A plastic mixer is a device that uses the principle of rapid rotation to achieve uniform mixing. By using the rapid...

Precautions For Plastic Crusher

Before use 1. Before starting, the transmission wheel should be manually moved one or two turns to confirm its flexibility before starting the machine. Wait for the crusher to operate normally befo...

Operation And Precautions Of Plastic Crusher

Trial operation 1. Close the magnetic starter handle to power on; 2. Press the button twice or three times with your hand; 3. Start and idle for 1-2 weeks; 4. Joint operation of reprinting machine ...

Inspection And Handling Of Plastic Crushers

1. The connecting components of the electric motor, reducer, hydraulic coupling, machine head, tail, and other parts must be complete, intact, and securely fastened. The reducer and hydraulic coupl...

Operating Procedures For Plastic Crushers

General provisions Article 1: Drivers of loaders and crushers must undergo training to achieve the "three understandings" (understanding structure, performance, and principles) and "...

Maintenance And Upkeep Of Plastic Crushers

1. The plastic crusher should be placed in a ventilated position to ensure the heat dissipation of the motor during operation and extend its lifespan. 2. Lubricating oil should be regularly added t...